24 July 2011

Rubber Tyre (Tire) Mark Removal at a Chemical Manufacturing Plant

Global Advantech has developed its next generation rubber deposit and tyre mark remover for warehouse, distribution centre and manufacturing unit floors. This product was developed to satisfy the requirements of major food, pharmaceutical, electronics, aerospace and distribution companies, for a rapid acting, non-hazardous product which enables them to remove unsightly, unhygienic and potentially hazardous rubber deposits from their floors left by forklift trucks.

Contract agrochemical manufacturing plant had its floors (20,000m2) surfaced with light grey epoxy coatings 12 months ago to maintain cleanliness. After 12 months, the entire production and warehouse areas were covered with heavy black rubber deposits from fork lift trucks.

Heavy Duty Rubber Deposit Remover CM700 was applied with a mop across a floor area coated with a badly damaged red epoxy surface and covered in places with rubber tyre deposits more than 1 mm thick, directly in front of two drum ovens. The CM700 was left for 5 minutes and then removed using a scrubber-drier machine charged with a 2% solution of Industrial Hard Surface Cleaner CM712.


Heavy Duty Rubber Deposit Remover CM700 was applied with a mop across a production floor area coated with a marked, light grey epoxy surface and covered in places with rubber tyre deposits up to 1 mm thick. The CM700 was left for 5 minutes and then removed using a scrubber-drier machine charged with a 2% solution of Industrial Hard Surface Cleaner CM712.





Successful removal of rubber deposits and re-instatement floors to a clean condition without using disruptive and expensive techniques, e.g. shot-blasting or diamond grinding floors generating large quantities of dust which would have contaminated manufacturing processes.

Global Advantech’s rubber deposit and tyre mark removal products:
  • exceed all European statutory environmental and health and safety requirements for chemical products.
  • contain no dichloromethane (methylene chloride), N‑methyl-2-pyrrolidone (NMP), d‑limonene/orange/plant terpenes, hydrocarbons nor any other dangerous solvents or chemicals.
  • are non‑toxic, non-hazardous and completely biodegradable.

Rubber Tyre (Tire) Mark Removal at a Major Non-Food Retail Distribution Centre


Global Advantech’s next generation of rubber deposit and tyre (tire) mark remover is used for warehouse, distribution centre and manufacturing unit floors. This non-hazardous product is now used by major food, pharmaceutical, electronics, aerospace and distribution companies, since it rapidly removes unsightly and unhygienic rubber deposits from floors and safety markings.

A major non-food and retailer in the UK had been searching for a product to remove unsightly and unhygienic rubber tyre deposits left by high volumes of forklift truck traffic in its distribution centres to improve the cleanliness. To comply with safety legislation the company had to either clean or repaint all the safety marking on the floor.

The two photographs below show the effectiveness of Heavy Duty Rubber Deposit Remover CM700 in cleaning away rubber tyre marks from a smooth concrete floor at one of the retailer’s distribution centres (in the North West). The CM700 was applied at a rate of 1 part of product in 5 parts of water to the rubber tyre marks and left for 5 minutes before being removed with scrubber-drier machine.







The two photographs show the effectiveness of Heavy Duty Rubber Deposit Remover CM700 in cleaning away rubber tyre marks from safety markings at the same distribution centre.




As before, the CM700 was applied diluted at a rate of 1 part of product in 5 parts of water to the rubber tyre marks and left for 5 minutes before being removed with scrubber-drier machine.

It can be seen clearly from the second photograph that the line markings were not damaged by the application of the product

  Global Advantech’s rubber deposit and tyre mark removal products:
  • exceed all European statutory environmental and health and safety requirements for chemical products.
  • contain no dichloromethane (methylene chloride), N‑methyl-2-pyrrolidone (NMP), d‑limonene/orange/plant terpenes, hydrocarbons nor any other dangerous solvents or chemicals.
  • are non‑toxic, non-hazardous and completely biodegradable.
 For more information, please see: http://www.globaladvantech.com/Chemical%20products/Chemical%20products.htm 

Removal of Rubber Tyre (Tire) Marks from the Concrete Floor in One of a Major UK Retailer's Warehouses

Global Advantech’s next generation of rubber deposit and tyre mark remover is used for warehouse, distribution centre and manufacturing unit floors. This  non-hazardous product is now used by major food, pharmaceutical, electronics, aerospace and distribution companies, since it rapidly removes unsightly and unhygienic  rubber deposits from floors and safety markings.

The largest food and household goods retailer in the UK had been searching for a product to remove unsightly and unhygienic rubber tyre deposits left by high volumes of forklift truck traffic in its distribution centres to improve the cleanliness. To comply with safety legislation the company had to either clean or repaint all the safety marking on the floor.

The two photographs below show the effectiveness of Heavy Duty Rubber Deposit Remover CM700 in cleaning away rubber tyre marks from a smooth concrete floor at one of the retailer’s distribution centres (in the North West). The CM700 was applied neat to the heavy rubber tyre deposits and left for 5 minutes before being removed with scrubber-drier machine.


The CM700 was applied neat to the heavy rubber tyre deposits and left for 5 minutes before being removed with scrubber-drier machine.


 
  • It can be seen clearly from the second photograph that the line markings were not damaged by the application of the product.

Global Advantech’s rubber deposit and tyre mark removal products:
  • exceed all European statutory environmental and health and safety requirements for chemical products.
  • contain no dichloromethane (methylene chloride), N‑methyl-2-pyrrolidone (NMP), d-limonene/orange/plant terpenes, hydrocarbons nor any other dangerous solvents or chemicals.
  • are non‑toxic, non-hazardous and completely biodegradable.
 For more information, please see: http://www.globaladvantech.com/Chemical%20products/Chemical%20products.htm

    19 July 2011

    Global Advantech's GENERAL PURPOSE AND HEAVY DUTY CLEANERS AND DEGREASERS



    Code
    Product
    Removes
    Details
    CM712
    HARD SURFACE CLEANER
    Light mineral oils + light greases,
    vegetable oils + greases,
    animal fats + greases,
    dirt
    · Floors: concrete, coated (epoxy, polyurethane), vinyl, wood, ceramic, quarry tile, etc.
    · Hard surfaces: walls, etc.
    · Usage: dilute 1:20 to 1: 200 with clean water, spray, cleaning machine, sponge, mop, etc.
    · Contains natural-derived and biodegradable surfactants
    CM732
    HIGH PERFORMANCE HARD SURFACE CLEANER
    Mineral oils + greases,
    fuel oil,
    vegetable oils + greases,
    animal fats + greases,
    dirt
    · Floors: concrete, coated (epoxy, polyurethane), ceramic, quarry tiles, terrazzo, etc.
    · Hard surfaces: bare walls, in factories, engineering workshops, etc.
    · Usage: dilute 1:20 to 1: 200 with clean water, spray, cleaning machine, etc.
    · Contains natural-derived and biodegradable surfactants and solvents
    CM734
    HEAVY DUTY SILICATE CLEANER+DEGREASER
    Heavy mineral oils + greases,
    fuel oil,
    vegetable oils + greases,
    animal fats + greases,
    dirt
    · Heavy duty moderately alkaline cleaner
    · Floors, walls, in kitchens, food processing, factories, etc.
    · Usage: dilute 1:20 to 1: 100 with clean water, spray, sponge, mop, wipe, cleaning machine, etc.
    · Contains natural-derived and biodegradable surfactants
    CM735
    HIGH ALKALINITY CLEANER+DEGREASER
    Heavy mineral oils + greases,
    fuel oil,
    vegetable oils + greases,
    animal fats + greases,
    dirt
    · Heavy duty alkaline cleaner
    · Floors, walls, hard surfaces in kitchens, food processing, engineering workshops, etc.
    · Usage: dilute 1:20 to 1: 100 with clean water, spray, sponge, mop, wipe, cleaning machine, etc.
    · Contains natural-derived and biodegradable surfactants